Will Novel Use of Common Element Combinations Replace Rare Earth Element Metals In Electronics?

Michael Irving

Michael Irving

Micro-crystals of zinc, which when combined with other common minerals, could be substituted in for rare-Earth...
Micro-crystals of zinc, which when combined with other common minerals, could be substituted in for rare-Earth metals in electronic devices(Credit: prill/Depositphotos)

Electronic devices are made possible thanks to a group of elements often referred to as rare-Earth metals, but as the name suggests, these may be in limited supply and are relatively expensive. Now, a team of scientists has found a way to combine much more common elements into electronically-useful compounds, which could find their way into tunable lighting and solar panels.

It takes all sorts of precious minerals to build electronic devices as smart as the ones we use everyday. Unfortunately many of these elements are quite hard to find and mine, making them expensive and prone to becoming even scarcer in the not-too-distant future. 

“We’re in danger of running out of some of those elements because they’re not easy to recycle and they’re in limited supply,” says Roy Clarke, an author of the study. “It’s not viable for technology to rely on something that’s likely to run out on a scale of 10 to 20 years.”

Companies like Honda and Samsung are beginning to develop ways to recycle these elements, while scientists are also trying to find new ways to recover valuable components and tackle the ever-growing e-waste problem

As useful as those initiatives are, it would be easier to just use cheaper alternatives. So the researchers on the new study, from the Universities of Michigan, Lorraine and Canterbury, set out to find a way to do so.


Elements on the periodic table are lined up in columns, which form related groups. The elements often used in electronics, such as indium and gallium, are from group III, sometimes called rare-Earth metals.

But the team on the new study found that combining elements from neighboring groups could create compounds with many of the useful properties of the rare-Earth metals. The researchers used molecular beam epitaxy (MBE) to produce the compounds in thin-film form, by layering the elements on top of each other with atomic precision.

A molecular-beam epitaxy system lays down each atomic layer of the compound in a systematic fashion,...

With this technique, the team was able to make a compound using elements from groups II, IV and V – zinc, tin and nitrogen. All of these are far cheaper and more common, but the resulting compound still has similar optoelectronic properties to its rarer counterparts. 

For one, the new compound is able to harvest solar energy and give off light, meaning it could be put to work as an affordable alternative in thin-film solar panels, LED lights, and displays. If zinc is replaced with magnesium, the range of available light extends into the blue and ultraviolet parts of the spectrum. 

The researchers found that the materials were also tunable, meaning they could be tweaked at the development stage to make components that are more sensitive to specific wavelengths of light. For example, light-emitting diodes made with these compounds could be tuned to give off specific colors of light.

“When you’re lighting a home or an office, you want to be able to adjust the warmth of the light, oftentimes mimicking natural sunlight,” says Clarke. “These new II-IV-V compounds would allow us to do that.”

The research was published in the journal Physical Review Letters.

Source: University of Michigan

Please follow and like us:

Hits: 13

Leave a Reply

Your email address will not be published. Required fields are marked *